Sn30/Pb70 Leaded Solder Wire

Sn30/Pb70 Leaded Solder Wire

Sn30/Pb70 leaded solder wire contains 30% Tin (Sn) and 70% Lead (Pb), engineered for conventional electronic assembly, electrical maintenance, and non-RoHS manufacturing environments. Compared to high-tin eutectic alloys, this formulation lowers material overhead while providing stable mechanical and electrical joints.
Send Inquiry
Description
Technical Parameters

Sn30/Pb70 Industrial Grade Leaded Solder Wire

 

Technical Datasheet & B2B Procurement Guide for Through-Hole Soldering & General Electronics Assembly

Sn30/Pb70 leaded solder wire contains 30% Tin (Sn) and 70% Lead (Pb), engineered for conventional electronic assembly, electrical maintenance, and non-RoHS manufacturing environments. Compared to high-tin eutectic alloys, this formulation lowers material overhead while providing stable mechanical and electrical joints.


Our wire is produced from virgin tin (minimum 99.9% purity) and refined lead ingots under ISO 9001 quality management systems, complying with relevant industrial standards for lead-bearing alloys. Through continuous casting, precision extrusion, and strict diameter calibration, we ensure a stable alloy structure, uniform flux distribution, and low dross generation.

 

Technical Specifications

 

Parameter

Specification Details

Alloy Composition

Tin (Sn): 30% / Lead (Pb): 70%

Melting Range

183°C - 255°C (Pasty range allows gradual solidification)

Available Wire Diameters

0.3 mm to 3.0 mm (± 0.05 mm tolerance)

Flux Types

R, RA, RMA, No-Clean

Flux Content

1.0% to 2.5% (Customizable upon request)

Standard Spool Weights

100 g, 200 g, 250 g, 500 g, 1 kg

Manufacturing Standards

Produced via continuous casting, precision drawing, and parallel layer winding

 

Core Technical Performance & Production Solutions

 

To eliminate common manufacturing defects, our Sn30/Pb70 solder wire addresses specific shop-floor challenges through precise metallurgical control:


Eliminating Inconsistent Solder Joints:

  • Cause & Solution: Mixed recycled metals cause erratic melting points. We use virgin raw materials verified by spectrometer analysis per batch, ensuring predictable melting behavior and uniform electrical conductivity.

 

Preventing Poor Wettability:

  • Cause & Solution: Sub-par spreading leads to cold joints. The 30/70 alloy combined with active flux formulations promotes rapid spreading over copper, brass, and nickel-plated surfaces, reducing operator rework.

 

Resolving Wire Feeding Disruptions:

  • Cause & Solution: Irregular wire diameters and crossed wire layers jam automatic feeding systems. Precision mechanical drawing combined with precise layer winding technology (parallel winding) ensures a tight diameter tolerance and smooth spool payoff, completely eliminating wire crossing and entanglement during high-speed automated soldering.

 

Minimizing Oxidation and Dross:

  • Cause & Solution: High impurity levels generate excessive residue. Controlled-atmosphere melting reduces oxide content, resulting in cleaner joints, less dross, and extended shelf life.

 

Flux Selection Guide

 

R (Rosin)

Unactivated natural gum rosin for standard, clean electrical soldering.

RMA (Mildly Activated Rosin)

Balanced activation for reliable performance with minimal, non-corrosive residue.

RA (Activated Rosin)

Higher activation level for enhanced oxide removal on challenging or slightly oxidized metal surfaces.

No-Clean

Formulated with low solid residues that are safe to leave on the PCB, eliminating post-solder washing processes.

Typical Applications

01/

Through-Hole PCB Assembly: General PCB manufacturing and component rework.

02/

Electrical Equipment: Wiring terminals, switches, relays, and control systems.

03/

Cable & Wire Harnesses: Mechanical and electrical connection of multi-strand cables.

04/

Appliance & Maintenance Workshops: Repair of power supplies, industrial control boards, and legacy electronics.

Quality Control & Traceability

 

Quality compliance is maintained through strict testing protocols prior to dispatch:
Composition Testing: Optical Emission Spectrometer (OES) or XRF alloy analysis.
Mechanical Inspection: Wire diameter tolerance checks and spool winding tension tests.
Performance Verification: Solderability, wetting balance, and residue inspection.
Traceability: Each shipment includes a Batch Quality Certificate detailing raw material lot numbers and test results.

OEM & Customization Services

 

We support full private-label and OEM manufacturing for global distributors and industrial brands:
Custom Alloy Ratios & Flux Content: Tailored to specific thermal profiles.
Packaging Solutions: Custom spool branding, private label stickers, barcode integration, and moisture-sealed vacuum bags packed in export-grade cartons.
Lead Time & Capacity: Stable bulk production capacity with fast sampling support for qualification testing.

 

Frequently Asked Questions

 

Q: Why does Sn30/Pb70 have a melting range instead of a single melting point?

A: Unlike eutectic alloys (such as Sn63/Pb37 which melts instantly at 183°C), Sn30/Pb70 has a plastic/pasty range between 183°C and 255°C. This gradual solidification is advantageous for filling larger gaps or hand-soldering connections that require a brief window to set.

Q: Is this wire compatible with automated selective or automatic soldering machines?

A: Yes. The tight diameter tolerance, stable parallel layer winding, and smooth surface finish prevent jamming in automated wire-feed mechanisms.

Q: What documentation is provided with bulk orders?

A: Every order ships with a Certificate of Analysis (CoA) confirming the exact tin/lead ratio, flux percentage, and test results.

 

Hot Tags: sn30/pb70 leaded solder wire, China sn30/pb70 leaded solder wire manufacturers, suppliers, factory

Send Inquiry
Send Inquiry